PrepShorts · Study sheet · Class 9 Mathematics · Chapter 2, Introduction to Linear PolynomialsPrepShorts

Chapter 2 · Introduction to Linear Polynomials

A polynomial as an input–output machine

यह वीडियो हिंदी में भी · Watch in Hindi

Expressions, polynomials, degree9 min

This video could not be loaded. Reload the page to try again.

Sign in with Google

9 min.

Also recorded in Hindi.Englishहिन्दी

Every question so far has been what a polynomial *is*. Ask what it *does* and the rule comes apart from the values.

The idea

Drawing a polynomial as a machine is not a cartoon for the sake of one — it separates the rule from the values, and once those are separated the two big questions of the chapter become askable. Feed the machine and you get the value; demand a particular reading on the output display and you get an equation; keep every input-and-output pair and you get a graph. The one property that makes the machine a machine is that it never hesitates: each input produces exactly one output. That is what the chapter is reaching for when it uses the word function, and it is a claim about behaviour, not a new piece of notation.

What you should be able to do

  • Evaluate a linear polynomial at a given input, including a negative input
  • Describe substitution as a process with one input and one output rather than as a rewriting of symbols
  • Explain what the word function is asserting about a polynomial, at the level this chapter uses it
  • Read the labels on the chapter's machine figure and say which part is the input, which the rule, and which the output
  • Distinguish a linear function from a quadratic function by the polynomial inside the machine
  • Evaluate a quadratic at a given input and observe that the same procedure applies
  • Say why the letter naming the input is arbitrary, and evaluate the same rule written with a different letter

Words to know

TermDefinition in one lineFirst introduced
input–output machinethe chapter's picture of a polynomial: a value goes in, a value comes outprinted on p. 20, in the sentence introducing Fig. 2.3; the figure's own caption calls it a process rather than a machine
functiona rule that turns each input into one outputprinted on p. 20
linear functiona function whose rule is a linear polynomialprinted on p. 21
quadratic functiona function whose rule is a quadratic polynomialprinted on p. 21, confirmed on p. 21 — the term breaks across a line, so the text layer splits it
substituteto put a chosen number in place of the letter and work the arithmeticprinted on p. 20 in the Think and Reflect box
value of the polynomialthe number that comes out for a given inputprinted on p. 20
variablethe letter that names the inputprinted on p. 16
output displaythe reading on the machine's face, y in Fig. 2.3an added label; the figure letters the panel but supplies no name for it
one output per inputthe property that makes the picture a machine rather than a lotteryan added phrasing; the property is relied on but not stated in this chapter

Standard Hindi vocabulary.

Where people slip up

  • "2 × –6 + 3 needs the whole thing negated." It does not. Only the 2x term goes negative; the +3 is untouched. Work it in two visible steps.
  • "Substitution means erasing the letter." It means choosing a value for it. The letter is still there in the rule, ready for the next input — which is exactly what the machine picture is for.
  • "The machine changes when I change the input." The rule on the display panel never changes. Only the card going in and the tag coming out do. Show several inputs through one unchanged machine.
  • "A function is a formula." At this level a function is a rule that commits to exactly one output per input. Two different-looking formulas can be the same function, and a rule that could return either of two answers is not one.
  • "Knowing the output tells me the input." For 2x + 3, yes. For 10x – x², no — both 4 and 6 give 24. Show this, because it is the difference between the two machines and it prepares the "which input?" question of the next module.
  • "x = 0 is a special case you cannot substitute." It is the easiest one, and it returns the constant term. Feed it in early.
  • "5x – 3 and 5s – 3 are different rules." They are the same machine with a different label on the input slot. The exercise set switches letters between consecutive items for exactly this reason.
  • "The output has the same units as the input." In the rectangle case a length in centimetres goes in and an area in square centimetres comes out. Label both ends of the machine.
Transcript1,271 words

Up to now, every question about a polynomial has been the same question. What is it? What is its degree, what are its coefficients, what is its constant term. Change the question. What does it do? Not what it is made of. What it does to a number. Two x plus three does something. Hand it a number, and it hands one back. That is worth drawing, because once you draw it the rule and the values come apart. And every remaining question in this topic is about one or the other.

Feed it four. Two times x plus three, with x set to four. Multiply first. Two times four is eight. Then add. Eight plus three is eleven. Four goes in, eleven comes out. And notice the letter did not get erased. Substituting is choosing a value for x, not deleting it. The rule is still sitting there, waiting for the next number. And watch what happens if you add before you multiply. Four plus three is seven, doubled is fourteen. Fourteen is not the answer. The order is not decoration.

Now feed it minus six. Multiply first. Two times minus six is minus twelve. Then add. Minus twelve plus three is minus nine. Here is where people lose it. They work out that two sixes are twelve, then put a minus in front of the whole of twelve plus three, and land on minus fifteen. Only the two-x term went negative. The plus three was never touched. And there is a second wrong route, which is worse, because it gets the right answer. Put the minus in front of twelve minus three instead, and out comes minus nine.

Right number. Wrong reason. And you cannot catch it by trying more negative inputs, because that route agrees with the machine at every negative number there is. Feed it four and it says minus five, where the machine says eleven. One more input, and it is the easiest one there is. Feed in zero. Two times zero is nothing at all, so what comes out is just the three. That is the constant term, standing on its own.

Which gives the constant term a meaning you can point at. It is what the machine returns when nothing goes in. And none of this depends on the letter. Five x minus three and five s minus three are the same machine with a different label on the slot. Run that one through. Five x minus three at zero gives minus three. At minus one, minus eight. At two, seven.

And here is one that catches almost everybody. Seven s squared minus four s plus six, at s equals minus three. Minus three squared is nine, and seven nines are sixty-three. Then minus four times minus three is plus twelve. Both of those came out positive. Sixty-three plus twelve plus six is eighty-one. So here is the machine, drawn properly. Three parts, doing three different jobs. A card goes in at the top, carrying the input. x equals four.

A panel on the front shows the rule. That panel never changes. A tag comes out of the side, carrying the output. Eleven. Change the card and the tag changes with it. The panel does not move. That separation is the whole reason for drawing this. Put in two and the tag reads seven. Put in three and it reads nine. Same machine every time. Nothing about it shifted. The panel needs a way of naming what it produces, so it gets a letter of its own.

y equals two x plus three. y is not a second unknown. It is a name for whatever comes out. So the card going in says x equals four, and the tag coming out says y equals eleven. So there are two letters on the machine now, and they have different jobs. x names what you choose. y names what you get. That second letter is going to matter later, when these pairs get plotted. For now it is simply the label on the display.

Now the property that makes this a machine rather than a lottery. Line the inputs up on the left, the outputs on the right, and draw one arrow from each. One, two, three. Out come five, seven, nine. Every input has exactly one arrow leaving it. No input ever splits into two answers. Put the same number in twice, and you get the same thing out twice. An arrow that split would mean the machine had hesitated. That the same number could come back as two different things.

That sounds too obvious to bother saying. It is not. It is exactly the thing being claimed. A rule that commits to exactly one output for each input has a name. It is called a function. Two x plus three is a function. And at this stage, that is the entire content of the word. Nothing more than that. It is a promise about behaviour, not a new piece of notation.

And a function is not the same thing as a formula. Two rules that look completely different can be one function, so long as they agree at every input. x plus the quantity x plus three is the same function as two x plus three. Meanwhile a rule that could hand back either of two answers is not a function at all, however tidy it looks written down. There is a great deal more to say about functions, and it gets said in later years. This is the part that is needed now.

Now swap the panel. Keep the machine exactly as it is, and change the rule to ten x minus x squared. That one is the area of a rectangle bent out of a twenty centimetre wire, with one side called x. Feed in six. Ten sixes are sixty. Six squared is thirty-six. Sixty take away thirty-six is twenty-four. Six goes in, twenty-four comes out. And look at what the labels say. Centimetres went in. Square centimetres came out. The machine changed the kind of quantity it was holding.

Now try four. Ten fours are forty. Four squared is sixteen. Forty take away sixteen is twenty-four. Twenty-four again. Two different inputs, and the same output. Which is not a fluke of the arithmetic. Six by four and four by six are the same rectangle, turned round. So this machine's output does not tell you what went in. Twenty-four could have come from four or from six, and the tag does not say which.

Two x plus three can never do that. Take any two different inputs. The gap between the outputs is two times the gap between the inputs. Two times something that is not zero is not zero. So the outputs cannot be equal. Different in, different out. Every time. And that is not a property of polynomials in general. The quadratic just broke it, and a rule that is simply the number seven breaks it as hard as anything can, by returning seven for everything.

It belongs to degree one, with a coefficient that is not zero. So the machine is drawn, and it buys three questions. Feed it something and ask what comes out. That is substitution, and it is the one we have been doing. Name an output instead, and ask which input produces it. That is an equation. Or keep every input-and-output pair at once and look at the whole collection together. That is a graph, and that is next.

One machine. Three questions. What separates them is only which end of it you are holding.

Where this fits

Taken from the notes each video was made from, not from the reading order — these are the ideas this one rests on and the ones that later rest on it.

Builds on

Comes up again in

The book

Open in a new tab